ATTENTION
YOU CANNOT RETURN THE KIT Please read the notice in RED below and REQUEST that your mechanic conduct a complete inspection of both wings and verify that both are in good condition and able to receive our specially designed spar reinforcement.
IMPORTANT NOTICE A CONFORMITY INSPECTION OF THE WINGS IS MANDATORY PRIOR TO PURCHASE & INSTALLATION OF THE Wing-X STOL & SPAR MODIFICATION.
Wing extensions add to the structural load and increase bending moments of the wing structure. Original factory wings have been tested and these additional loads are addressed with the introduction of our spar reinforcement design. Prior to installing our wing extensions and spar reinforcement It is MANDATORY to inspect both wing(s) in order to insure the structure conforms to original Cessna design. Any splice repairs approved or otherwise to the forward or aft spar may negate the possibility of installing our spar reinforcement. In order to identify the position of our spar reinforment you may download our installation drawings and install guide from our website at; https://www.wingxstol.com/html/faq.html
Air Research Technology Inc.
3440 McCarthy Street, Montreal, Quebec, Canada H4K 2P5
Telephone Local or International : 1-514 337-7588
Toll free: 888 325-2588 In North America
info@wingxstol.com